Professional manufacturing recommendati Chief

專業製造推薦志得橡膠工廠|矽膠工廠
Close

PRODUCT

See More

Waterproof & Antifouling Oil Seals

These are waterproof and antifouling oil seals. The extreme thinness we have ever made is 0.4mm.

特價0

Waterproof & Antifouling Oil Seals
Waterproof & Antifouling Oil Seals

Rubber Piston for Medical Devices

These rubber piston are made in Silicone for medical devices.

特價0

Rubber Piston for Medical Devices
Rubber Piston for Medical Devices

Waterproof Rubber Seal

The rubber seal in selicone / rubber material is applied to light device for waterproof.

特價0

Waterproof Rubber Seal
Waterproof Rubber Seal

Rubber Button with Direction Printing

The cost of this rubber button with direction printing is less expensive compete with Plastic with Rubber button. It's another option for customers' consideration.

特價0

Rubber Button with Direction Printing
Rubber Button with Direction Printing

Microphone Rubber Kits

These kits in Silicone / rubber are a part of microphone components. Adhesive requirement is acceptable.

特價0

Microphone Rubber Kits
Microphone Rubber Kits

Conductive silicone strip

The conductive rubber is rolled into a thin sheet using conductive silicone rubber insulation silicone rubber, and then laminated with an alternating layer and then hot-pressed, and then cut into a sheet. The conductive layer interacts with the insulating layer to form a linear circuit. Soft, especially suitable for the conduction of current between the PC version and the liquid crystal display panel (LCD) without scratching the PC version and the panel. It is generally used to connect and conduct two independent electronic components, which can replace the flexible cable ( FPC)

特價0

Conductive silicone strip
Conductive silicone strip

Various Rubber Keypads

These various rubber keypads are applied for various large machine and instrument.

特價0

Various Rubber Keypads
Various Rubber Keypads

Rubber Parts of Stylus Pen

The rubber parts of stylus pen is with special surface treatment can be used in tablet and smart phone.

特價0

Rubber Parts of Stylus Pen
Rubber Parts of Stylus Pen

Acrylic with Silicone Component (Over Molding)

Acrylic supports hardness, and Silicone maintains elasticity. This component is very popular in various button.

特價0

Acrylic with Silicone Component (Over Molding)
Acrylic with Silicone Component (Over Molding)

Waterproof Rubber Components

This is waterproof rubber component whose inside is screw thread for special waterproof usage.

特價0

Waterproof Rubber Components
Waterproof Rubber Components

Rubber mountings (rubber to metal bonded) component

This is a switch that silicone rubber to copper bonded for large machines ON/Off button.

特價0

Rubber mountings (rubber to metal bonded) component
Rubber mountings (rubber to metal bonded) component

Glass with Silicone Component Over Molding

This item is applied to high-end optical instruments which require good waterproof function.

特價0

Glass with Silicone Component Over Molding
Glass with Silicone Component Over Molding

PET with Silicone Component (Over Molding)

This is waterproof seal made by PET with Silicone through insert molding.

特價0

PET with Silicone Component (Over Molding)
PET with Silicone Component (Over Molding)

Switches

Various shape of Switches in silicone rubber material.

特價0

Switches
Switches

Plastic with Silicone Component (Over Molding)

These series components are popular at various telecommunications and medical devices. The function in waterproof proforms good and stable.

特價0

Plastic with Silicone Component (Over Molding)
Plastic with Silicone Component (Over Molding)

Rubber parts of Automotive and Motorcycles

These rubber parts in silicone/rubber, NR , NBR , CR , EPDM material are applied for Automotives and Motorcycles.

特價0

Rubber parts of Automotive and Motorcycles
Rubber parts of Automotive and Motorcycles

Plastic & Rubber Keypads

This Plastic & Rubber keypads can reduce some tooling cost and production process cost. But it keeps the same feeling as the touch of Rubber keypads. It's a new option for customers.

特價0

Plastic & Rubber Keypads
Plastic & Rubber Keypads

Grommet

rubber grommet

特價0

Grommet
Grommet

Metal with Silicone Component (Over Molding)

Metal & Silicone Component cover the product outward appearance well, it can protect the product with crashworthy and waterproof function.

特價0

Metal with Silicone Component (Over Molding)
Metal with Silicone Component (Over Molding)

Plastic Rubber Keypad

The surface treatment of the Plastic with Rubber Keypad can fullfill for either matte or shine requirement.

特價0

Plastic Rubber Keypad
Plastic Rubber Keypad

Rubber Metal Dome Keypads

The rubber metal dome keypads are with good efficient of conduction.

特價0

Rubber Metal Dome Keypads
Rubber Metal Dome Keypads

Polydome Keypads

Polydome Electronic Control Keypads

特價0

Polydome Keypads
Polydome Keypads

Conductive Silicone Rubber Switches

This conductive button is applied for switches, it can have more efficient of conduction.

特價0

Conductive Silicone Rubber Switches
Conductive Silicone Rubber Switches

Rubber eartrips

This product was made by silicone, color and hardness are all customized, also have medical grade.

特價0

Rubber eartrips
Rubber eartrips

Conductive silicone

Its main function is sealing and electromagnetic prohibition. The product can be molded or extruded. Conductive silicone rubber has good electromagnetic sealing and water vapor sealing capabilities, and can provide good conductivity under a certain pressure.

特價0

Conductive silicone
Conductive silicone

Silicone Coaster

特價0

Silicone Coaster
Silicone Coaster

Tablet Rubber Cover

This tablet rubber cover is with crashworthy and waterproof functions.

特價0

Tablet Rubber Cover
Tablet Rubber Cover

Teflon with Silicone Component (Over Molding)

Teflon (PTFE) with Silicone is an elastic component with smooth surface.

特價0

Teflon with Silicone Component (Over Molding)
Teflon with Silicone Component (Over Molding)

Medical O-ring

These are waterproof and antifouling oil seals. The extreme thinness we have ever made is 0.4mm.

特價0

Medical O-ring
Medical O-ring

Rubber mountings (rubber to metal bonded) component

This rubber to copper bonded switch is normally applied for large machine.

特價0

Rubber mountings (rubber to metal bonded) component
Rubber mountings (rubber to metal bonded) component

Waterproof Fubber Switches

This product is qualified by IP 67 which is conductive under water.

特價0

Waterproof Fubber Switches
Waterproof Fubber Switches

Smartwatch Wrist Strap

This Smartwatch Wrist Strap is applied to consumer electronics or medical devices.

特價0

Smartwatch Wrist Strap
Smartwatch Wrist Strap

Rubber Seals

This product is a large truck engine waterproof seal, the product length exceeds 600mm, and it is made of AEM raw materials.

特價0

Rubber Seals
Rubber Seals

Silicone with TPU component

The Silicone with TPU component has passed through RCA abrasion wear test at least 5000 rounds.

特價0

Silicone with TPU component
Silicone with TPU component

cotton with Silicone Component (cotton filter)

This product is mainly used for medical accessories. It uses a combination of filter cotton and silicone. The combination of two materials can reduce the trouble and instability of post-processing.

特價0

cotton with Silicone Component (cotton filter)
cotton with Silicone Component (cotton filter)

Rubber Products with Single side Adhesive

The rubber products with single side adhesive can be attached to electric products for warterproof usage.

特價0

Rubber Products with Single side Adhesive
Rubber Products with Single side Adhesive

Rubber Feet

The rubber feet is qualified by ISO 13485 for medical devices.

特價0

Rubber Feet
Rubber Feet

silicone urinal

This is silicone urinal, which is mainly used for medical equipment parts.

特價0

silicone urinal
silicone urinal

Flexible Printed Circuit (FPC) with Silicone Component (Over Molding)

FPC some people call PCB can be made with Silicone by insert molding. It is very popular for any need in waterproof.

特價0

Flexible Printed Circuit (FPC) with Silicone Component (Over Molding)
Flexible Printed Circuit (FPC) with Silicone Component (Over Molding)

Laser Marking Translucent Keypads

The keypad is colored by laser according to customers' requirement.

特價0

Laser Marking Translucent Keypads
Laser Marking Translucent Keypads

Silicone Rubber Single-Button

This is silicone rubber single-button with hollow.

特價0

Silicone Rubber Single-Button
Silicone Rubber Single-Button

Silicone Rubber Keypad with printing

This rubber keypad with printing is applied for palm computer.

特價0

Silicone Rubber Keypad with printing
Silicone Rubber Keypad with printing

Multicolor Rubber Keypads

Colorful buttons you can have for the rubber keypads.

特價0

Multicolor Rubber Keypads
Multicolor Rubber Keypads

Rubber Case Foot

This product is for anti slipping.

特價0

Rubber Case Foot
Rubber Case Foot

Non-slipping Rubber Mat

This product is for anti slipping.

特價0

Non-slipping Rubber Mat
Non-slipping Rubber Mat

Various O-rings

The O-rings are normally for waterproof and oil resistance usage. The tiny o-ring can be made as samll as 0.3mm dia.

特價0

Various O-rings
Various O-rings

CHIEF TECH/ About us

Chief Tech Rubber Industrial Co., Ltd. was established in 1990 which is a professional manufacturer of various silicone / rubber products; including varies types and forms of conductive keypads, waterproof seals, O-rings, Rubber-to-metal parts, anti-vibration mounts, silicone-based thermal pads, rubber gaskets, and different kind waterproof & oil resistant products. Over the years, Chief Tech Rubber Industrial Co., Ltd. continues its expansion by adding new personnel, equipment and facilities to serving our growing list of customers.

MORE>

HOT NEWS

More

International buyers photos-2024 Latin America Buyers

International buyers photos-2024 Latin America Buyers

International buyers photos-2024年拉丁美洲商機日

International buyers photos-Germany

International buyers photos-Germany

International buyers photos-Germany

International buyers photos-Europe

International buyers photos-Europe

International buyers photos-Europe

International buyers photos-Singapore

International buyers photos-Singapore

International buyers photos-Singapore

International buyers photos-USA

International buyers photos-USA

International buyers photos-USA

Chief Tech rubber New Rubber Injection Machine

Chief Tech rubber New Rubber Injection Machine

Chief Tech rubber New Rubber Injection Machine

Chief Tech - New Machine

Chief Tech - New Machine

This is a new machine with ambition. Our company is not only a professional silicone rubber manufacture, but also dedicated to researching and developing new machines, accelerating production operations, and using different machines for each products. This machine mainly produces exquisite and versatile products to increase production efficiency.

New Silicone Injection Machine

New Silicone Injection Machine

Chief Tech have imported a new

Chief Tech Rubber -Year-end party

Chief Tech Rubber -Year-end party

Chief Tech Rubber -Year-end party

Birthday Party For Each Employee

Birthday Party For Each Employee

Birthday party for each employee

New Equipment-Sever-type Style Slicing Machine (Most Popular)

New Equipment-Sever-type Style Slicing Machine (Most Popular)

New equipment-Sever-type Style Slicing Machine (Most Popular)

November 1ST, 2019 - Moved to the new plant.

November 1ST, 2019 - Moved to the new plant.

Chief Tech Rubber has moved to the new plant in November 1st 2019. To continue its expansion by adding new personnel, equipment and facilities to better serve the technical needs of our growing list of customers.

Rubber Factory Supplies Are Widely Used

Rubber Factory Supplies Are Widely Used

The daily necessities of our rubber factory are widely used. Products made of silicone materials can be seen from kitchen utensils, sporting goods, baby products, beauty care products, and the like. Our rubber factory is committed to cherishing the earth's resources, dedicating to the development of environmentally-friendly and energy-saving materials, creating good business performance, and allowing enterprises to continue to advance steadily on the road of development. Rubber factories bring more benefits and value to stakeholders and all the public.

Page Top

 Sitemap

2019© Copyright All Rights Reserved

Rubber factory rubber, plastic, various product research and development, and develop mold design, raw material research and development, as well as various types of rubber, rubber factory products, silicone rubber, rubber, rubber factory in the process of waste rubber, defective products, waste The waste material produced by the edge material and the consumption of motor vehicles has professional rubber production and rubber production technology.